中继经常red Alarm

00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
Subsystem: Intel Corporation 82801H (ICH8 Family) HD Audio Controller
Flags: bus master, fast devsel, latency 0, IRQ 22
Memory at ff9f4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Capabilities: [70] Express Unknown type IRQ 0


01:0e.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface
Subsystem: Unknown device 79fe:0001
Flags: bus master, medium devsel, latency 64, IRQ 22
I/O ports at a800
Memory at ff4ff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
以上算不算中断冲突？如果冲突怎么处理？

hello,
cat /proc/intruupt?
结果是什么？ 如果有中断共享的话，你换个插槽试试。
asterisk 下面 运行： pri show spans， 如果你的spans 是 up active 才可以打通电话，要不然你那些日子里面的信息的哦有没有用处。spans 的状态 up active 才可以的。所以你的设置或者物理链接可能还是有问题。
james.zhu

你看看中断有没有问题
[root@localhost proc]# cat /proc/interrupts
CPU0 CPU1
1: 2 0 Phys-irq i8042
7: 0 0 Phys-irq parport0
8: 1 0 Phys-irq rtc
9: 0 0 Phys-irq acpi
12: 4 0 Phys-irq i8042
17: 5767873 89437 Phys-irq uhci_hcd:usb1, eth1
18: 0 0 Phys-irq uhci_hcd:usb2
19: 0 0 Phys-irq uhci_hcd:usb3, ehci_hcd:usb7
20: 9686850 0 Phys-irq uhci_hcd:usb4, libata, libata
21: 0 0 Phys-irq uhci_hcd:usb5, ehci_hcd:usb6
22: 696267476 6759897 Phys-irq wcte11xp, HDA Intel
23: 51359639 115 Phys-irq eth0
256: 103634909 0 Dynamic-irq timer0
257: 5806094 0 Dynamic-irq resched0
258: 37 0 Dynamic-irq callfunc0
259: 0 32986680 Dynamic-irq resched1
260: 0 84 Dynamic-irq callfunc1
261: 0 22791371 Dynamic-irq timer1
262: 0 0 Dynamic-irq xenbus
263: 0 0 Dynamic-irq console
NMI: 0 0
LOC: 0 0
ERR: 0
MIS: 0

下面是show的结果，通话是正常的，就是出现red alarm日志后所有正在通话中的电话全部断掉了
localhost*CLI> pri show spans
PRI span 1/0: Provisioned, Up, Active

你应该给D110P更换一个PCI插槽，因为D110P和HDA Intel 共用了一个中断号 22: 696267476 6759897 Phys-irq wcte11xp, HDA Intel

出red alarm表示物理连接断了，自然不能通话。RED alarm每天出多少次？能否自动恢复？zapata.conf内容？

red alarm后会马上就自动恢复，前一段时间每天要断2，3次吧

以下是配置文件
;zapata telephony interface
; Configuration file
[trunkgroups]
[channels]
language=cn
context=incoming
signalling=pri_cpe
rxwink=300 ; Atlas seems to use long (250ms) winks
;
; Whether or not to do distinctive ring detection on FXO lines
;
;usedistinctiveringdetection=yes
;pridialplan=local
;prilocaldialplan=local
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
echotraining=yes
rxgain=2
txgain=2
;group=0
callgroup=1
pickupgroup=1
immediate=no

;faxdetect=both
faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no
;Include genzaptelconf configs
;switchtype = euroisdn
switchtype = national
group=1
channel = 1-15
channel = 17-31